Keith Krueger
Member
- Messages
- 53
The desk is built and sitting in the shop waiting for finish to cure and for my Granddaughter to select handles. The SU file does not include the loose tenon joints as I have a shop built fixture (built on an old ShopSmith) that makes mortises with a center location and preset height and depth adjustment. So I find that I can add this detail to parts after cutting to finish size with many dimensions.
The media center is my next project and it will be built of Ash with the top and trim stained dark like a design in a magazine last year. This also lacks the mortise details and the slots for the 1/4 in panel. I find these are easy to keep track of in the shop as I detail the parts.
Note: I had to zip the files as they were slightly over the 150 limit
View attachment Desk.zip
View attachment MediaCenter.zip
The media center is my next project and it will be built of Ash with the top and trim stained dark like a design in a magazine last year. This also lacks the mortise details and the slots for the 1/4 in panel. I find these are easy to keep track of in the shop as I detail the parts.
Note: I had to zip the files as they were slightly over the 150 limit
View attachment Desk.zip
View attachment MediaCenter.zip