Results 1 to 8 of 8

Thread: Prefinished Plywood Supplie..DFW/Lewisville Area?

  1. #1
    Join Date
    Nov 2006
    Location
    Odessa, Tx
    Posts
    1,813

    Question Prefinished Plywood Supplie..DFW/Lewisville Area?

    Has anyone purchased, (OR know of a Good Supplier) for Prefinished Plywood in the DFW or Lewisville, Tx area. I would like to check them out while on this visit to facilitate planning for a future project here.

    Thanks for any information you might have.

  2. #2
    Join Date
    Nov 2006
    Location
    Delton, Michigan
    Posts
    17,472
    norman do a search for prefinished plywood then go to dealers after thet..
    If in Doubt, Build it Stout!
    One hand washes the other!
    Don't put off today till tomorrow!

  3. #3
    Join Date
    Jan 2009
    Location
    I live in Denton, Texas and ranched at Schulenburg, Texas.
    Posts
    116
    Norman have you contacted PAXTON'S wood. They used to have a store in Carrolton, but that is closed. I know Ft Worth Plywood has a wide range of plywoods and they have a website. I live in Denton; if you need help contact me. Ray Gerdes
    Last edited by Raymond Gerdes; 01-12-2009 at 11:44 PM. Reason: spelling

  4. #4
    Join Date
    Oct 2006
    Location
    ABQ NM
    Posts
    30,017
    Quote Originally Posted by Raymond Gerdes View Post
    Norman have you contacted PAXON'S fine wood. They used to have a store in Carrolton, but that is closed. I know Ft Worth Plywood has a wide range of plywoods and they have a website. I live in Denton; if you need help contact me. Ray Gerdes
    Ray, I'm guessing you meant Paxton Wood?

    http://ziphip.com/Paxton+Wood+Source...947p.home.html
    When the going gets weird, the weird turn pro. - Hunter S. Thompson
    When the weird get going, they start their own forum. - Vaughn McMillan

    workingwoods.com

  5. #5
    Join Date
    Oct 2008
    Location
    Texas
    Posts
    16
    You might give one of these 4 a call...

    Central Hardwoods 972-241-3571 or 800-460-2030
    or email sales@centralhardwoods.com

    Plywood Co. of Ft. Worth 817-831-4206 or 800-931-9319 or email info@plywoodcompany.com

    Brazos Forest Products
    972- 602-1225 / 800-772-2777 or email bobby.walden@brazosfp.com

    Dixieply (972) 445-6543 or (800) 950-8025
    Michael

    "It's hard to soar with eagles when you fly with buzzards"
    GO STARS

  6. #6
    Join Date
    Dec 2006
    Location
    North Central Texas - DFW
    Posts
    89
    I think I would try the Fort Worth Plywood co first. I have not yet purchased anything from them, (at least a 1 hour drive for me each way) but one of my friends a work has purchased from them and said they have a big selection.

  7. #7
    Join Date
    Nov 2006
    Location
    Between Aledo and Fort Worth, TX
    Posts
    2,784
    Double check to be sure, but I don't think Plywood Co of Ft. Worth is open on Saturdays. I still need to go there someday myself. And I'm only 25 minutes away! Jim.
    Coolmeadow Setters...
    Exclusively Irish!
    Home of Irish Setter Rescue of North Texas
    When Irish Eyes are smiling, they're usually up to something!!
    At a minimum, I'm Pentatoxic...but most likely, I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, season 3


  8. #8
    Join Date
    Nov 2006
    Location
    Odessa, Tx
    Posts
    1,813
    Thanks to All for the info. I will make a copy of these for my next trip over there. I didn't get to pursue it further after I posted the request due to a family emergency of one of the two girls that rent rooms at my Daughter's house, so we Drove her to East Texas since she was too upset to make ANY long drive by herself and really needed our support. We really didn't have time to do much else that was in our plans after that before we had to come home.

    Thanks again for the References.

Similar Threads

  1. If your in the DC area
    By Dave Hawksford in forum Off Topic Discussion
    Replies: 1
    Last Post: 07-16-2013, 12:38 AM
  2. Any one going to IWF from my area???
    By Jay Caughron in forum Off Topic Discussion
    Replies: 0
    Last Post: 08-17-2012, 11:26 PM
  3. Rural area, yep
    By Steve Southwood in forum Off Topic Discussion
    Replies: 7
    Last Post: 07-02-2011, 06:00 AM
  4. Prefinished Hardwood Flooring - installation Q.
    By Art Mulder in forum Carpentry and Construction
    Replies: 9
    Last Post: 01-12-2008, 05:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •