- Messages
- 16,578
- Location
- Reno NV
I've got a problem. Too many guitars, not enough stands, or wallspace, or room. I've started to do some recording and I'd like to have my collection available to suit my creative whims, so I'm thinking of slapping together a quick guitar stand. I've seen similar ones made out of pipes and tubes, but I've got a pile of birch plywood I bought that's begging to be used on something.
So I'm thinking of making the sides of birch ply, and the stretchers out of pine, or mayby poplar or oak.
This thing is meant to be put together with screws so that it can be dis-assembled if need be.
Since the screws are going into end grain, I'll probably put some cross-dowels for the screws to get some bite.
Any feedback?
Thanks in advance for your time.
So I'm thinking of making the sides of birch ply, and the stretchers out of pine, or mayby poplar or oak.
This thing is meant to be put together with screws so that it can be dis-assembled if need be.
Since the screws are going into end grain, I'll probably put some cross-dowels for the screws to get some bite.
Any feedback?
Thanks in advance for your time.
Last edited: