Page 1 of 6 12345 ... LastLast
Results 1 to 10 of 57

Thread: Hall tree It's done

  1. #1
    Join Date
    Mar 2008
    Location
    NH
    Posts
    4,006

    Hall tree It's done

    So here is the afternoons work on the hall tree.
    The first one and the second one are the raw materials. Tested out at 6% MC
    3 and 4 are the first board working it with the trusty #5 this board will be one of the sides.
    5 6 7 8 and 9 more planing
    10 a shot of the size of the third board
    Attached Thumbnails Attached Thumbnails tn_wood 012.JPG   tn_wood 013.JPG   tn_wood 014.JPG   tn_wood 015.JPG   tn_wood 016.JPG  

    tn_wood 017.JPG   tn_wood 018.JPG   tn_wood 019.JPG   tn_wood 020.JPG   tn_wood 021.JPG  

    Last edited by Chuck Thoits; 01-05-2010 at 03:13 AM.
    It could be worse You could be on fire.
    Stupid hurts.

  2. #2
    Join Date
    Mar 2008
    Location
    NH
    Posts
    4,006
    11 another shot of the size of the third board.
    12 same board
    13 14 and 15 the help hard at it
    16 and 17 the Festool track all set up to make the first cut
    18 the piece that was ripped off
    19 a shot of the saw
    Attached Thumbnails Attached Thumbnails tn_wood 021.JPG   tn_wood 022.JPG   tn_wood 023.JPG   tn_wood 024.JPG   tn_wood 025.JPG  

    tn_wood 026.JPG   tn_wood 027.JPG   tn_wood 028.JPG   tn_wood 030.JPG  
    Last edited by Chuck Thoits; 12-31-2009 at 01:02 AM.
    It could be worse You could be on fire.
    Stupid hurts.

  3. #3
    Join Date
    Mar 2008
    Location
    NH
    Posts
    4,006
    20 the first end cut
    20 time to get out the router
    21 the rabbit cut in the front of the second board for the back
    22 the second board for the back
    Attached Thumbnails Attached Thumbnails tn_wood 031.JPG   tn_wood 032.JPG   tn_wood 033.JPG   tn_wood 034.JPG  
    Last edited by Chuck Thoits; 12-31-2009 at 01:05 AM.
    It could be worse You could be on fire.
    Stupid hurts.

  4. #4
    Join Date
    Nov 2006
    Location
    Delton, Michigan
    Posts
    17,474
    ok you been holdin out there captian,, i never saw no green tools when i was there??? or wew yu hidun them from the rif raf now i know why we got along so well yu have a hankerun for draggin yur knuckles too nice curlies and the buds liked it too i see!!! thats gonna be a fun project to watch chuck..wide boards there too watch for your movement on them so it dont bite yu in the hinny
    If in Doubt, Build it Stout!
    One hand washes the other!
    Don't put off today till tomorrow!

  5. #5
    Join Date
    Sep 2007
    Location
    Plainwell, Michigan
    Posts
    4,857
    That is one large board this looks like a fun one to follow Is this a personal project or a commission?

  6. #6
    Join Date
    Dec 2006
    Location
    RETIRED(!) in Austintown, Ohio
    Posts
    5,322
    That sure is one nasty looking Stanley #3 in the first set of pics. Looks like it got the job done, though...
    Jim D.
    Adapt, Improvise, Overcome!

  7. #7
    Join Date
    Mar 2008
    Location
    NH
    Posts
    4,006
    Quote Originally Posted by Jim DeLaney View Post
    That sure is one nasty looking Stanley #3 in the first set of pics. Looks like it got the job done, though...
    The #3 is just sitting on the side lines. The #5 did all the work.
    It could be worse You could be on fire.
    Stupid hurts.

  8. #8
    Join Date
    Nov 2008
    Location
    Ottawa, Ontario, Canada
    Posts
    34
    Wow
    Nice wide boards. Watching with great interest, just got my first plane for xmas and still have to learn how to use it.
    Bruce

  9. #9
    Join Date
    Feb 2007
    Location
    North West Indiana
    Posts
    6,099
    Hey Bruce, these guys won't tell you, just "push" that there plane! No motor, no switch, no cord, no battery. Point it forward and push!

    Hey there pirate, you cutting up the "plank"? Kalea know you took the plank off of the ship and are using it up???
    Jon

    God and family, the rest is icing on the cake. I'm so far behind, I think I'm in first place!

    Host of the 2015 FAMILY WOODWORKING GATHERING

  10. #10
    Join Date
    Mar 2008
    Location
    NH
    Posts
    4,006
    Quote Originally Posted by Jonathan Shively View Post
    Hey Bruce, these guys won't tell you, just "push" that there plane! No motor, no switch, no cord, no battery. Point it forward and push!

    Hey there pirate, you cutting up the "plank"? Kalea know you took the plank off of the ship and are using it up???
    No Jonathan.
    The plank on the ship is way narrower.
    Think 2x4 on edge.
    It could be worse You could be on fire.
    Stupid hurts.

Similar Threads

  1. Up next... The hall bench project.
    By John Pollman in forum Flatwork Project Showcase
    Replies: 41
    Last Post: 06-11-2014, 11:41 PM
  2. A Hall Clock
    By Dave Richards in forum Designs, Plans and Sketches
    Replies: 4
    Last Post: 03-28-2011, 06:56 PM
  3. Hall Butler
    By Bob Gibson in forum Flatwork Project Showcase
    Replies: 2
    Last Post: 12-03-2009, 04:41 PM
  4. walnut hall table
    By edward alexander in forum Flatwork Project Showcase
    Replies: 45
    Last Post: 07-30-2008, 04:20 PM
  5. Hall Table Finished!!!
    By Ed Nelson in forum Flatwork Project Showcase
    Replies: 44
    Last Post: 06-20-2008, 03:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •