Results 1 to 5 of 5

Thread: Performax 16-32 Plus Drum Sander -Sold

  1. #1

    Performax 16-32 Plus Drum Sander -Sold

    Sold Performax 16-32 Plus Drum Sander
    North Central Ohio
    Price Reduced...See post below


    I have a Performax 16-32 Plus Drum Sander unit that I bought and assembled, but have never used. And I mean never; it has not even had a test board run through it. It comes complete with original factory accessories: stand, 4 locking casters, in-feed/out-feed tables, the original belt, plus an assortment of 4 additional belts (1 36 grit, 2 80grits, 1 120 grit).

    Combining the cheapest prices on each part at Woodcraft, Rockler, Highland and Amazon, this unit would sell for:

    Performax 16-32 Plus 999.99
    Locking Caster Set 124.99
    In-Feed/Out-Feed Tables 105.00
    4 Roll Abrasive Asst. 36.99
    Total Cost 1266.97 plus tax and shipping

    I am asking $950 for this entire never-used assembly. That is a 25% discount off the lowest individual prices I could find on the net this afternoon. Cash or USPS money order only.

    Sorry, this unit is too bulky and heavy to package for shipping. Pick up in New London, OH, or I can deliver within a reasonable distance for a reasonable price. New London is about 50 miles southeast of Cleveland, about 95 miles north of Columbus, or about 25 miles directly south of Sandusky/Cedar Point, Ohio.

    E-mail or call if you have questions.

    Joe Pack
    jpack24@gmail.com
    419-606-7048
    __________________
    Last edited by Joe Pack; 02-14-2010 at 06:22 PM. Reason: Adjust Price

  2. #2
    Join Date
    Oct 2006
    Location
    somewhere east of Queen Creek, AZ - South East of Phoenix
    Posts
    8,529
    Quote Originally Posted by Joe Pack View Post
    Performax 16-32 Plus Drum Sander
    North Central Ohio

    I have a Performax 16-32 Plus Drum Sander unit that I bought and assembled, but have never used. And I mean never; it has not even had a test board run through it. It comes complete with original factory accessories: stand, 4 locking casters, in-feed/out-feed tables, the original belt, plus an assortment of 4 additional belts (1 36 grit, 2 80grits, 1 120 grit).

    Combining the cheapest prices on each part at Woodcraft, Rockler, Highland and Amazon, this unit would sell for:

    Performax 16-32 Plus 999.99
    Locking Caster Set 124.99
    In-Feed/Out-Feed Tables 105.00
    4 Roll Abrasive Asst. 36.99
    Total Cost 1266.97 plus tax and shipping

    I am asking $950 for this entire never-used assembly. That is a 25% discount off the lowest individual prices I could find on the net this afternoon. Cash or USPS money order only.

    Sorry, this unit is too bulky and heavy to package for shipping. Pick up in New London, OH, or I can deliver within a reasonable distance for a reasonable price. New London is about 50 miles southeast of Cleveland, about 95 miles north of Columbus, or about 25 miles directly south of Sandusky/Cedar Point, Ohio.

    E-mail or call if you have questions.

    Joe Pack
    jpack24@gmail.com
    419-606-7048
    __________________
    wish the tool fund wasn't depleted. i'd snap it up in a minute..
    "There’s a lot of work being done today that doesn’t have any soul in it. The technique may be the utmost perfection, yet it is lifeless. It doesn’t have a soul. I hope my furniture has a soul to it." - Sam Maloof
    The Pessimist complains about the wind; The Optimist expects it to change;The Realist adjusts the sails.~ William Arthur Ward

  3. #3

    Performax 16-32...Price Reduced

    PRICE REDUCED...

    Honestly, I would like to have the Performax 16-32 out of my way. I can't give it away, but I can move just a little more to get rid of it. To get it gone, I can let it go for $850, but I just can't go less than that; I have more than that in it, and it is absolutely brand new. $850 is 2/3 of new cost for the sander, stand, infeed/outfeed tables and 4 locking casters, and that doesn't even count shipping and sales tax that would add to the cost depending on vendor and locality.

    If you are interested, send me an e-mail with contact information or give me a call at 419-606-7048 (not after 9:30 p.m, EST, please; my wife is up early).

    Shipping is not practical, but pick up here or meeting part way may be a possibility.

  4. #4
    Join Date
    Aug 2007
    Location
    Reno NV
    Posts
    13,360
    Have you tried Craigs list? That's an awesome deal... I can't believe it wouldn't be snapped up in a second..
    Programmer - An organism that turns coffee into software.
    If all your friends are exactly like you, What an un-interesting life it must be.
    "A door is what a dog is perpetually on the wrong side of" Ogden Nash


  5. #5

    SOLD

    Sander is sold, thanks to a google search that turned up Family Woodworking.

Similar Threads

  1. Performax 10/20 drum sander - SOLD!
    By Jim DeLaney in forum Classified Ads
    Replies: 16
    Last Post: 03-30-2016, 02:52 AM
  2. Flip Top Tool Table - Performax Drum Sander
    By Brent Dowell in forum Jigs and Fixtures
    Replies: 33
    Last Post: 06-01-2013, 05:10 AM
  3. Performax 16/32 Drum Sander
    By Charlie Plesums in forum Old Ads
    Replies: 1
    Last Post: 05-31-2010, 05:56 PM
  4. performax 16-32 drum sander sold
    By ray klosek in forum Old Ads
    Replies: 2
    Last Post: 03-30-2010, 02:39 PM
  5. Performax 22-44 Plus Drum Sander w/Open Stand
    By Don Taylor in forum Hot Deals
    Replies: 6
    Last Post: 12-04-2007, 08:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •