- Messages
- 36,134
- Location
- ABQ NM
Here's another ash piece from my firewood lot stash. This is the other half of the piece of crotch wood I made the recent NE hollow form out of. It has some interesting honeycombing/wind shake/whatever in the bottom of the bowl, so using it for soup is probably out of the question, as was the vacuum chuck. The blank had a large crack on the edge that went deeper than I wanted to turn out, so I left it as-is. There are also some bug holes below the bark in one area. Here again, I just left them alone. It's 13 1/4" by 7" and finished with my same ol' same ol' Formby's, buff, and wax.
This was another piece I used as a test run for some new cutters Craig Jackson was trying for the Ci0 tool, so all of the inside was done with round carbide cutters.
I'm interested to see your thoughts on it.
This was another piece I used as a test run for some new cutters Craig Jackson was trying for the Ci0 tool, so all of the inside was done with round carbide cutters.
I'm interested to see your thoughts on it.