Mike Jory
Member
- Messages
- 59
- Location
- San Francisco East Bay Area
testing upload
- Thread starter Mike Jory
- Start date
- Messages
- 36,123
- Location
- ABQ NM
Hey hey, buddy! One test per thread!
Just kidding...test away.
Just kidding...test away.
Mike Jory
Member
- Messages
- 59
- Location
- San Francisco East Bay Area
HELLO VAUGHN.......
Don Taylor
Former Member (by the member's request)
- Messages
- 1,287
Some test Mike! Lots and Lots of GOODIES! 
DT
DT
- Messages
- 36,123
- Location
- ABQ NM
Hi back at ya, Mike. I see you got the semi-faded signature thing working.HELLO VAUGHN.......
Jim McDonald
Member
- Messages
- 16
- Location
- Ellsinore, Mo.
Test
http://i162.photobucket.com/albums/t263/jimmcdonald1/DSCN1426.jpg
west wall of 10 x 16 shop.
east wall
http://i162.photobucket.com/albums/t263/jimmcdonald1/DSCN1425.jpg
Ok, that didn't quit go like I thought it would! So, what did I do wrong?
http://i162.photobucket.com/albums/t263/jimmcdonald1/DSCN1426.jpg
west wall of 10 x 16 shop.
east wall
http://i162.photobucket.com/albums/t263/jimmcdonald1/DSCN1425.jpg
Ok, that didn't quit go like I thought it would! So, what did I do wrong?
Last edited:
Jim McDonald
Member
- Messages
- 16
- Location
- Ellsinore, Mo.
one more time
By George, I think I've got it!
And yes, I've still got room for the SC drill press, with a few minor changes. Sky hooks any one?
By George, I think I've got it!
And yes, I've still got room for the SC drill press, with a few minor changes. Sky hooks any one?
Last edited:
Don Taylor
Former Member (by the member's request)
- Messages
- 1,287
Jim McDonald
Member
- Messages
- 16
- Location
- Ellsinore, Mo.
Don Taylor
Former Member (by the member's request)
- Messages
- 1,287
They both do the same job Jim.
DT
DT
Jim McDonald
Member
- Messages
- 16
- Location
- Ellsinore, Mo.
Sky hook
Don,
Where did you get your lift? While I don't have room in this shop, I do have room in the one in MO. Would sure beat having to start the tractor (which never wants to run when you need it) to lift things out of the truck.
Don,
Where did you get your lift? While I don't have room in this shop, I do have room in the one in MO. Would sure beat having to start the tractor (which never wants to run when you need it) to lift things out of the truck.
Stuart Ablett
Member
- Messages
- 15,917
- Location
- Tokyo Japan
Hi ya Mike, here are my sky hooks............
The Heavy Duty one....
and the lighter duty electric one!
Love them sky hooks!
The Heavy Duty one....
and the lighter duty electric one!
Love them sky hooks!
Jim McDonald
Member
- Messages
- 16
- Location
- Ellsinore, Mo.
Sky Hooks
Never thought I'd suffer from....sky hook envy!
Never thought I'd suffer from....sky hook envy!
Don Taylor
Former Member (by the member's request)
- Messages
- 1,287
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=41188
Here you go Jim,
The guys who built my shop wanted over $3000 to put in a lift. I looked and thought about it for a long time. This Gantry Crane was $600 and is good for one ton. They charged me $60 shipping.
That big sucker just kinda disappears wrapped around my table saw/work table island. It rises to 12' high and I have a 12' overhead. I am thinking about replacing the top beam with a 24' I-beam and putting the legs against the walls. I would have my wall-to-wall skyhook for under $1200.
That trolley set on the top rail in the picture doesn't come with it. You will have to get one there at harbor freight. If you have one close enough to drive to, I would print that picture and make them give me one as advertised. They probably won't give you any problems. They are usually pretty good to deal with.
DT
Don Taylor
Former Member (by the member's request)
- Messages
- 1,287
Hey Stu,
Do you keep those gi-raphs in the Dungeon so they can look through the hatch and see if anyone's coming?
DT
Do you keep those gi-raphs in the Dungeon so they can look through the hatch and see if anyone's coming?
DT