Frank Pellow
Member
- Messages
- 2,332
- Location
- Toronto, Ontario, CANADA
This winter I will probably be making about 20 shelving units similar the four that are shown in the attached picture.
You will notice that, on shelves that I made last winter, I just left the plywood edges. I don’t like the wood edging tape that is often used to mask the plywood. I have taken now to gluing on narrow wood strips instead. I just spotted an item called an adjustable bullnose edging router bit in the Lee Valley catalogue and I am looking for advice from anyone who has had experience with such a bit. Here is a link: http://www.leevalley.com/wood/page.aspx?c=2&p=53250&cat=1,46168,46182
You will notice that, on shelves that I made last winter, I just left the plywood edges. I don’t like the wood edging tape that is often used to mask the plywood. I have taken now to gluing on narrow wood strips instead. I just spotted an item called an adjustable bullnose edging router bit in the Lee Valley catalogue and I am looking for advice from anyone who has had experience with such a bit. Here is a link: http://www.leevalley.com/wood/page.aspx?c=2&p=53250&cat=1,46168,46182
Last edited: