Results 1 to 8 of 8

Thread: A worthwhile Edition of Magazine

  1. #1
    Join Date
    Jun 2008
    Location
    GTA Ontario Canada
    Posts
    12,256

    A worthwhile Edition of Magazine

    Hi All

    A while back i decided i had enough of the magazines piling up so i cancelled the lot prefering to buy on site when i see something worthwhile.

    Well if you aint seen it yet i would highly recommend the Special edition of Fine Woodworking for those of who want more info on finishing.

    Dave if you see this i would love to have you pick up a copy and give us your thoughts on the contents. The whole issue is on finishing.

    PS. The link is to the version of cover i found on the racks in Canada.

    I cannot seem to find it on the Taunton Publishers site or on Fine Woodworking. It says to display to end of March. Its not a magazine edition as described for the march edition. This is a special Finishing Edition.

    Taunton Product no. 017017

    Its one of the "Best of Fine Woodworking" series.
    http://www.tauntonstore.com/finishing-wood-017017.html

    Seems that number brings up a different cover edition for the general public or US.

    I have seen the pic on this cover in my edition. So i guess they the same thing.
    cheers

  2. #2
    Join Date
    Nov 2006
    Location
    Oak Harbor Washington on Whidbey Island
    Posts
    3,134
    Thanks Rob

    I'll go pick this up, I like to collect these for future reference material. I have several of these & refer to them many times throughout the year.
    "Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
    "If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart

  3. #3
    Join Date
    Apr 2009
    Location
    Outside the beltway
    Posts
    5,255
    Rob I use to get it also but found that I am one of them Know it all's that only seem to pic apart the writers article
    Really I do !
    If the article is not for the Harry Home owner may times they are written with out the user in mind. What I mean to say is, some guys will say you need to do this X with out telling you you better be looking out for this Y to happen and if it dose then this X will not work. Got you confused yet ?

    I'll take a look for it. I was at Wood Workers Club Saturday down in town. Rob we were not in tune Saturday
    I dream a lot. I do more painting when I'm not painting. It's in the subconscious.
    ::: Andrew Wyeth :::
    colonialrestorationstudio.com

  4. #4
    Thanks.....I will see if I can get it

  5. #5
    Join Date
    Nov 2006
    Location
    Oak Harbor Washington on Whidbey Island
    Posts
    3,134
    Quote Originally Posted by Dave Hawksford View Post
    Rob I use to get it also but found that I am one of them Know it all's that only seem to pic apart the writers article
    Really I do !
    If the article is not for the Harry Home owner may times they are written with out the user in mind. What I mean to say is, some guys will say you need to do this X with out telling you you better be looking out for this Y to happen and if it dose then this X will not work. Got you confused yet ?

    I'll take a look for it. I was at Wood Workers Club Saturday down in town. Rob we were not in tune Saturday
    I really don't know if your in tune out of tune or around town or out of town.
    "Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
    "If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart

  6. #6
    Join Date
    Jun 2010
    Location
    Vancouver Island, Courtenay/Comox Valley, British Columbia
    Posts
    3,220
    I haven't seen it where I shop.......
    AKA Young Grasshopper Woodworker
    AKA The Rookie

  7. #7
    Join Date
    Feb 2011
    Location
    Northern Lower Michigan/Troll
    Posts
    196
    I have 20 years of Fine Woodworking, but they lost my interest along the way so I sent them a letter telling them why after 20 years, since the black and white days, I was not resubscribing. Never heard a word, so I guess they don't care. Their stuff became too basic, nothing to stretch my imagination or skill level.

    I told them they should start another magazine for those of us that made the first one work. They could call it "Truely Fine Woodworking"!

    I'm down to Mother Earth News and Grit these days....

  8. #8
    Join Date
    Apr 2009
    Location
    Outside the beltway
    Posts
    5,255
    Quote Originally Posted by Bart Leetch View Post
    I really don't know if your in tune out of tune or around town or out of town.
    All the above depending on weather or not I take my med's
    I dream a lot. I do more painting when I'm not painting. It's in the subconscious.
    ::: Andrew Wyeth :::
    colonialrestorationstudio.com

Similar Threads

  1. Every now and then you find a worthwhile gadget
    By Rob Keeble in forum Off Topic Discussion
    Replies: 4
    Last Post: 02-14-2016, 06:38 PM
  2. Replies: 5
    Last Post: 02-06-2015, 11:12 PM
  3. Worthwhile tip for every woodworker that sharpens a tool
    By Rob Keeble in forum General Woodworking Q&A
    Replies: 1
    Last Post: 01-05-2012, 10:17 AM
  4. A worthwhile few words for us all to consider
    By Rob Keeble in forum General Woodworking Q&A
    Replies: 9
    Last Post: 06-23-2011, 11:19 PM
  5. Palm router worthwhile?
    By ken werner in forum General Woodworking Q&A
    Replies: 35
    Last Post: 12-14-2010, 12:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •