Wait a minute.
I do believe there is a certain amount of talking at cross purposes taking place in this thread.
On one hand many are saying buy new but they saying buy a bigger completely different machine config that costs substantially more than a 14" bandsaw.
I note Bill Lantrys post on the delta and i am not going to defend Delta but i will say lets talk technical and specifics as to why a bandsaw does or does not resaw adequately.
Then I would say make a decision from there.
The general build of the Grizz Go55 is the same basic saw as the delta.
Both are tai chi unless you get the X5 made in the USA like i did which well nowadays you might as well go for a grizzly like Jim et al have purchased and save money and get a better saw.
But if you think you gonna change out saws and buy a Grizz G0555 which i sense is pulling you that way simply because there is a tent sale then i think you making a real mistake.
It takes HP to resaw properly.
It takes a proper blade set up to cut properly at 90degreees to the table both ways.
It takes proper tension.
These three elements are going to be an issue whether its the Delta 14" series or the Go555 series. There aint gonna suddenly be a miracle happen because its Polar bear white.
Tai chi casting are baiscally the same. So in my opinion you gonna get pretty much the same issues.
The standard machines are not generally sold with good quality tires in fact some come with pressed steel wheels never properly balanced versus heavier cast wheels that have been.
Nothing will change if the wheels are not in alignment. This gets back to tune up of the saw.
This big deal about roller guides is not all fact. They do clog read up what a guy that is an expert has to say about roller guides. They are not the criteria required to obtain a good resaw.
I spent ages to get my saw to resaw and it was all in the set up the tune up the blade and understanding what the heck i was doing.
Dont go throwing the baby out with the bath water just because the Grizz marketing guys have got into your head with a tent sale.
Last point is take note that the 14" Cast frame C config bandsaws which covers Jet, Grizz, Delta and a bunch more are all suseptable to flex. This and power of motor is one of the main reasons the welded larger resaw frame machines are now more popular and have become better priced.
If you pm me with an email address i will send you some info that i have on Iturra Design this comes from a guy that trully knows what he is talking about and has built a reputation and business on the bandsaw alone.
BUt if you want polar bear white that badly go for it.
Most of these companies copied the 14" Delta so i dont see the point.