Results 1 to 8 of 8

Thread: 6" atlas jointer

  1. #1

    Red face 6" atlas jointer

    I just purchased a 6" atlas jointer and the blades are in rough shape machine is in great shape though, I just had the blades sharpened, there are two blades in each slot 3 slots total 1 blade in each slot sets lower than the other, one set looks like extra blades I think ,does the lower blade set on bottom of slot and the top blade with top of bench or is there some other ajustment ? any help would be helpful !

    Thank you

    Dave

  2. #2
    Join Date
    Oct 2006
    Location
    The Heart of Dixie
    Posts
    4,264
    Never heard of a saw using two blades. You sure it is a blade? Could be a spacer I guess but I have never seen one.

    I would suggest going to OWWM now, vintage machines and seeing if you find a manual for that one. I am sure someone on the forum knows that joiner well.
    God grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do,
    and the eyesight to tell the difference.


    Kudzu Craft Lightweight Skin on frame Kayaks.
    Custom built boats and Kits

  3. #3
    Join Date
    Oct 2006
    Location
    Central NY State
    Posts
    3,349
    Dave, welcome to FWW. Jeff gave you good advice. Often, if you have a question about equipment here, a photo will be helpful.
    If you're not part of the solution, you're part of the precipitate.

  4. #4
    Join Date
    Nov 2006
    Location
    Oak Harbor Washington on Whidbey Island
    Posts
    2,824
    You'll need your model number to research it. I found this with Google.

    http://www.bonanza.com/listings/Atla...-1950/14925649


    You may find what your looking for under General Line Catalogs you'll need Adobe Acrobat Reader.

    http://vintagemachinery.org/mfgindex...px?id=51&tab=3
    "Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
    "If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart

  5. #5
    Join Date
    Sep 2007
    Location
    St. Louis, MO
    Posts
    559
    Typically what you'll have is a blade held tight along its full length by a jib, which is locked in place by bolts. The blade sits higher than the jib. The jibs might be tapered instead of flat, or may have angled depressions where the lock bolts engage them. Usually, there's something like that to counter the rotational forces pushing them out of the slot. No need to sharpen the jibs, as they never contact the wood.

    Atlas made very good joiners. Is yours direct or belt drive? We love pics if you have a camera.

    If you go over to www.vintagemachinery.org and go to the photo archives in the Atlas section, you'll see pics of several others that might help you out. You'll also find that they have manufacturers' publications / manuals on most of these old machines (Atlas was a pretty well known name). You'll probably get some helpful information there. They are pdf format and downloadable for free, though a donation is encouraged.

    If you strike out with manuals or parts diagrams there, you might try www.owwm.org and go into the "old woodworking machines" thread. You can search the archives of discussions, or post your own questions. There are a lot of seasoned veterans to old machinery over there.

    Have fun with it.

    paulh

  6. #6

    atlas jointer

    well That helped me out a great deal I will go to those sites and see what they have, thank you so much

    Davey

  7. #7

    atlas jointer

    Thanks to everyone who replied , I went to vintagemachinery and wow what a great site I downloaded a manual for the Atlas 6" jointer 6001 it is now up and running great just like new
    thanks again to everyone

    Davey

  8. #8
    Join Date
    Aug 2007
    Location
    Reno NV
    Posts
    10,977
    Fantastic! way to bring the old iron back to life!
    Programmer - An organism that turns coffee into software.
    If all your friends are exactly like you, What an un-interesting life it must be.
    "A door is what a dog is perpetually on the wrong side of" Ogden Nash


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •