Boards For My Kids

Greg Brimer

Member
Messages
59
Here is a set of boards that I made for my kids. I made two sets. One for my kids at home and one for my son and his family. All my boys play football for Mayfield.

I made the stencils out of 16ga stainless steel. They will be around for awhile.
I put painters tape on the board and traced out the stencil. I cut each color out with a xacto knife. I cut the color black section out first. To keep the black from bleeding into the red I peel up the tape and paint around the edge with the red color. That way it seals the tape and there is no bleed out. I do that will all the colors. When the paint is dried I have very crisp lines. That is the way the black lines of the square look so good. Boards with multiple colors takes awhile. I put 4 to 5 coats of poly on top of the paint. I then use water and soap and sand out the boards with 000 stainless steel.

Greg
 

Attachments

  • Mayfield Cornhole.jpg
    Mayfield Cornhole.jpg
    108.9 KB · Views: 34
  • template1.jpg
    template1.jpg
    7.3 KB · Views: 29
  • template2.jpg
    template2.jpg
    10.3 KB · Views: 28
  • template3.jpg
    template3.jpg
    8.2 KB · Views: 31
  • templates.jpg
    templates.jpg
    11.6 KB · Views: 30
Top