Jason Beam
Member
- Messages
- 1,364
- Location
- Sacramento, CA
Well after making the very first cut with the CNC router I just built, it became painfully obvious that I absolutely needed some kinda dust collection fast. So here's what I designed...
Turns out 1" thick polycarbonate is pricy - like $70 for the piece I'd need. So I went with 3/4" Baltic birch instead. Using the above sketchup model, I used PhlatScript to output some G-code for it and the polycarbonate pieces ... Here's that BB bit:
Turns out 1" thick polycarbonate is pricy - like $70 for the piece I'd need. So I went with 3/4" Baltic birch instead. Using the above sketchup model, I used PhlatScript to output some G-code for it and the polycarbonate pieces ... Here's that BB bit: