Tom Baugues
Member
- Messages
- 2,794
- Location
- Lafayette, Indiana
I added a dust collector to my shop this summer. I used PVC pipe for my runs. One of them runs down a wall that I had insulation between the studs. I removed the insulation at the time to get it all fitted but now I wonder if I will have any stactic issues by adding the insulation back. There are also electric wires going through this section.
Note: this is on the outside wall of my shop. My dust collector is in the other half of my building and I ran PVC through the walls.
Note: this is on the outside wall of my shop. My dust collector is in the other half of my building and I ran PVC through the walls.