Kerf cutting

Working on a prototype strum stick guitar, and I'm at the point of making the linings{I think that's what they're called- the strips that bind the top & bottom to the sides}..anyways, could use some ideas on creating the kerfs so they are somewhat uniform in spacing & depth...the lining size I've chosen is 3/8" high x 1/4" thick. I'm sure I could make a jig similar to a box joint jig for the table saw, but leaning towards using the band saw and a stop block clamped partially behind the blade {if that makes sense}, just thinking that might be a simpler/quicker jig to toss together.......sure could use a few thoughts, thanks....:huh:
 
Top