Results 1 to 5 of 5

Thread: Need your help with repairing my Delta Table saw.

  1. #1

    Need your help with repairing my Delta Table saw.

    I hope I am posting this in the correct area, moderator, please move this posting to the correct forum, if necessary.I am repairing my table saw I inherited. Now I need to build what ever it is that the 'splitter' attaches to . I have the splitter and a mounting bracket. I don't have any clue what the bracket attaches to but i know it mounts some where and some how, near the motor.
    I hoping for pictures or drawings that clearly show how the splitter attaches to the frame of the table saw, and firmly, and securely holds it in place behind the blade. I am assuming the mounting method some how allows for quick removal for dadoing and re- installation.

    My saw is a Delta 10 inch model 34-670

  2. #2
    Join Date
    Apr 2007
    Location
    No, not all of SoCal is Los Angeles!
    Posts
    9,076
    I believe you will find what you want on page 9 of the owner's manual here.
    Any sufficiently advanced technology is indistinguishable from magic.
    - Arthur C. Clarke

  3. #3
    Join Date
    May 2007
    Location
    Kansas City, Missouri
    Posts
    13,454
    Looks like you may be able to get any missing parts from here, I clicked on most of them and they showed as available...
    http://www.ereplacementparts.com/del...3334_7069.html
    Darren

    To a small child, the perfect granddad is unafraid of big dogs and fierce storms but absolutely terrified of the word “boo.” – Robert Brault

  4. #4
    Quote Originally Posted by Darren Wright View Post
    Looks like you may be able to get any missing parts from here, I clicked on most of them and they showed as available...
    http://www.ereplacementparts.com/del...3334_7069.html
    Thanks Glenn and Darren! However upon closer examination and measuring, I don't think this is my table saw.. I found a serial number for the saw. it is Delta 91H51264 and cat. No# 34-444 i don't know if it is a type 1 or 2 .
    But I think the spreader and brackets i need looks like this: http://www.ereplacementparts.com/bracket-p-192901.html and http://www.ereplacementparts.com/spl...g-p-84421.html.

    But I don't know how it attaches the table saw frame, back by the motor. and i would like measurements for these items so I can make my own.
    Any help with pictures and measurements any one please?
    Thanks

  5. #5
    Join Date
    May 2007
    Location
    Kansas City, Missouri
    Posts
    13,454
    Quote Originally Posted by David Trompower View Post
    Thanks Glenn and Darren! However upon closer examination and measuring, I don't think this is my table saw.. I found a serial number for the saw. it is Delta 91H51264 and cat. No# 34-444 i don't know if it is a type 1 or 2 .
    But I think the spreader and brackets i need looks like this: http://www.ereplacementparts.com/bracket-p-192901.html and http://www.ereplacementparts.com/spl...g-p-84421.html.

    But I don't know how it attaches the table saw frame, back by the motor. and i would like measurements for these items so I can make my own.
    Any help with pictures and measurements any one please?
    Thanks
    Can you take a picture of the back of the saw for us, specifically where the bracket would connect at the rear. There are actually 4 types of that model number. After looking at it the type 3 looks like the one I have, can check this weekend to verify.
    Darren

    To a small child, the perfect granddad is unafraid of big dogs and fierce storms but absolutely terrified of the word “boo.” – Robert Brault

Similar Threads

  1. Delta jointer 37-220 table removal
    By Jack Jard in forum General Woodworking Q&A
    Replies: 4
    Last Post: 09-10-2010, 08:01 PM
  2. Delta Table Saw on Craigslist
    By Dan Pierce in forum Old Iron
    Replies: 30
    Last Post: 04-01-2010, 04:04 PM
  3. Delta Table Saw question
    By Dan Mosley in forum New Tools
    Replies: 2
    Last Post: 11-02-2008, 06:15 AM
  4. Delta 10" table saw
    By Garry Smith in forum Old Ads
    Replies: 0
    Last Post: 08-13-2008, 02:01 PM
  5. old Delta table saw
    By Frank Fusco in forum Old Iron
    Replies: 6
    Last Post: 11-26-2006, 12:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •