Dietrich Trenner
Member
- Messages
- 178
I built a table top out of African Mahogany. I sanded the top starting at 80 grid and going to 220 grid. I applied no stain, but did apply furniture oil to bring out the great color of Mahogany. I than applied three coats of poly sanding with 220 grid between coats. The final coat was sanded with 320 grid. I then applied Minwax wax. In retrospect this was probably a mistake according to an article in FWW magazine. The top now has an area about 3 inches across that is dull and I can't buff it out by hand. Any ideas and help would be greatly appreciated.
Thank you, DKT
Thank you, DKT