Bryan Cowing
Member
- Messages
- 728
- Location
- Ridgetown, Ontario, Canada
Bought plans and some tools last May. I guess I better get at it.
I started with the seat, making it from 2 pieces.
cut the notches and routed the 1" tenon.
2x10 spruce jig
laminated 8 strips at 1/8" thick, they bend easy
I had 5/8" radius round over & rabbet router bits on hand , plans used 1/2" R. Had to do a test block first. Fiddly work!
I started with the seat, making it from 2 pieces.
cut the notches and routed the 1" tenon.
2x10 spruce jig
laminated 8 strips at 1/8" thick, they bend easy
I had 5/8" radius round over & rabbet router bits on hand , plans used 1/2" R. Had to do a test block first. Fiddly work!