Dave Hawksford
Member
- Messages
- 7,713
- Location
- Outside the beltway
I picked a 14" a couple months ago, Cheap. I decided to put a new blade on and change out the bearings and add cooling pads. I found the support base for the table had a 1.5" piece broken off the rocker and began looking for a replacement.
Called Delta and the told me the part was discontinued, they lead me to a company who makes replacements. While talking with there tech guy I was also on EBay and found one1/3 the price. Then I felt the tug to order a carbide tips blade. By next weekend I should be cutting up a lot of call blanks , snakewood, rosewood, zebra wood and spalted Maple.
Called Delta and the told me the part was discontinued, they lead me to a company who makes replacements. While talking with there tech guy I was also on EBay and found one1/3 the price. Then I felt the tug to order a carbide tips blade. By next weekend I should be cutting up a lot of call blanks , snakewood, rosewood, zebra wood and spalted Maple.
Last edited: