- Messages
- 20,088
- Location
- Springfield, Missouri
A friend asked for a couple of these quite some time ago, but haven't had the time or opportunity to work on them between grandson watching and summer heat. I was able to knock them out on Saturday.
I used a couple of the prefinished award plaques I bought at auction a while back. I waxed them with paste wax first before applying the avery paint mask, then routed them on the cnc
Some rattle can red applied.
After 2 hours of drying, I pealed the mask off. I had a couple of spots that the mask was bubbled, but luckily with the initial coat of wax, the sloppy parts cleaned right off with the scrape of a thumb nail.
One of the finished signs...
I used a couple of the prefinished award plaques I bought at auction a while back. I waxed them with paste wax first before applying the avery paint mask, then routed them on the cnc
Some rattle can red applied.
After 2 hours of drying, I pealed the mask off. I had a couple of spots that the mask was bubbled, but luckily with the initial coat of wax, the sloppy parts cleaned right off with the scrape of a thumb nail.
One of the finished signs...