Results 1 to 8 of 8

Thread: Early symptoms

  1. #1
    Join Date
    Nov 2006
    Location
    Delton, Michigan
    Posts
    17,231

    Talking Early symptoms

    well i think i am cumin down with something i started feelin it while in missouri, and it has gotten progressivly worse. so i will show you some of the symptoms and see if yuou can tell me how to treat it and possibly cure it

    Attachment 9097 Attachment 9098 Attachment 9099
    can anyone tell me what i have here? it has these names on it."ZJM master"auburn newyork and then below "Clark"

    Attachment 9100

    this is a 45 but dont have the rods, or the cutters,any idea of age or value?

    Attachment 9101 Attachment 9102

    this a bailey no.3 great wood, again age ,value?

    Attachment 9103 Attachment 9104

    this no.3 size Fulton? plain wood and made in usa,,again how did i do

    great havun abrother that is ajunk collector...
    Last edited by larry merlau; 05-28-2007 at 02:54 PM. Reason: more info
    If in Doubt, Build it Stout!
    One hand washes the other!
    Don't put off today till tomorrow!

  2. #2
    Join Date
    Oct 2006
    Location
    ozarks
    Posts
    4,992
    careful there larry! this is much worse than spin-crack......
    [SIZE="1"] associated with several importers and manufacturers.[/SIZE]

  3. #3
    Join Date
    Nov 2006
    Location
    Delton, Michigan
    Posts
    17,231

    Wink Yup i think so

    its steve's fault, he said i needed a potty and while in his one long afternon i saw how he had his decorated so i figured mine should be decorated likewize or it wouldnt work properly i refurbished a 192 yestrday and while doing so i was thinkun of my great great uncle that at one time used this very plane and to think that agin sometime in the near future i will be using it again i have learned to respect the hand work of the early craftsman.. they were some skilled folk...
    If in Doubt, Build it Stout!
    One hand washes the other!
    Don't put off today till tomorrow!

  4. #4
    Join Date
    Nov 2006
    Location
    Oak Harbor Washington on Whidbey Island
    Posts
    3,083
    Its called oldhandtoolustanoses there is no known cure & is felt mostly in the hands & heart.

    It makes me cry for all the old tools in glass cases never to be use again accept as decorations.
    Last edited by Bart Leetch; 05-28-2007 at 03:17 PM.
    "Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
    "If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart

  5. #5
    Join Date
    Nov 2006
    Location
    Delton, Michigan
    Posts
    17,231
    Quote Originally Posted by Bart Leetch View Post
    Its called oldhandtoolustanoses there is no known cure & is felt mostly in the hands & heart.

    It makes me cry for all the old tools in glass cases never to be use again accept as decorations.
    hey bart or any others have any idea what the wooden one is or how old, value?
    If in Doubt, Build it Stout!
    One hand washes the other!
    Don't put off today till tomorrow!

  6. #6
    Join Date
    Nov 2006
    Location
    Oak Harbor Washington on Whidbey Island
    Posts
    3,083
    Quote Originally Posted by larry merlau View Post
    hey bart or any others have any idea what the wooden one is or how old, value?
    It looks like a fence guided plow plane. Check the toe or heal to see if there is anything stamped into the wood.
    "Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
    "If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart

  7. #7
    Join Date
    Nov 2006
    Location
    Delton, Michigan
    Posts
    17,231

    it does bart,

    Quote Originally Posted by Bart Leetch View Post
    It looks like a fence guided plow plane. Check the toe or heal to see if there is anything stamped into the wood.
    i had it wrote on the post,, ."ZJM Master" Auburn, NewYork and then below "Clark"
    If in Doubt, Build it Stout!
    One hand washes the other!
    Don't put off today till tomorrow!

  8. #8
    Join Date
    Nov 2006
    Location
    Oak Harbor Washington on Whidbey Island
    Posts
    3,083
    Sorry Larry I should have gone back & re-read your first post.

    Check this out.

    http://www.planemaker.com/articles/plow.htm
    Last edited by Bart Leetch; 05-29-2007 at 02:18 AM.
    "Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
    "If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart

Similar Threads

  1. i may be starting a little early....
    By Dan Noren in forum Flatwork Project Showcase
    Replies: 21
    Last Post: 05-06-2014, 10:46 AM
  2. Early fathers day
    By Alan Bienlein in forum New Tools
    Replies: 18
    Last Post: 05-09-2010, 04:17 AM
  3. What's to early ?
    By Gene Miller in forum General Woodworking Q&A
    Replies: 47
    Last Post: 12-27-2008, 08:40 AM
  4. Forced to log on early
    By Brian Kight in forum General Woodturning Q&A
    Replies: 15
    Last Post: 09-23-2008, 07:28 AM
  5. a bit early.....
    By tod evans in forum Off Topic Discussion
    Replies: 11
    Last Post: 12-24-2006, 01:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •