Jim O'Dell
Member
- Messages
- 2,783
- Location
- Between Aledo and Fort Worth, TX
Took off work about 45 minutes early today. Did the trash thing, fixed the weedeater, then went to the shop to work on the last 2 panels to have enough for one whole side, plus the master.Been at it for an hour or so, and I walk over to get something...Gee the floor looks wet. __ ___!! I've got another roof leak. Different spot, so my manhood is still intact. It's close to the other valley, although it's coming from a little past there, and traveling down a seam in the plywood decking. Thank goodness it's not OSB!! It dripped on the base of the drill press, but somehow missed the motor, head and table! I pulled 2 ceiling panels down, one 2' X 2', the other where the drip is, 2' X 8'. I left the fan blowing up toward the hole to try to help dry things out. Odd thing is the insulation was barely damp on that edge.
So now I get to do roofing in the summer time. It almost killed me doing it when it was only 80!! This will be about 30% more than I did on the other side. I haven't held back any funds for this.
Sorry, but I had to cry on someone's shoulder. I know it will all work out, and everything will be fine. No need to reply. Jim.
So now I get to do roofing in the summer time. It almost killed me doing it when it was only 80!! This will be about 30% more than I did on the other side. I haven't held back any funds for this.
Sorry, but I had to cry on someone's shoulder. I know it will all work out, and everything will be fine. No need to reply. Jim.