I'm considering build a free standing TV cabinet. The first pic shows the 2 outside support 'legs'. There will be cainetry constructed between these supports for DVD/cab;e box etc... and a plasma on top of the cabinet overall its about 28" high and maybe 40" wide
The supports will have top and bottom caps with dados to accept the curved vertical piece.
Second pic is just the vertical piece that has me scratching my head. The radius of the ends are 4". I want use figured veneer for these pieces. I'm thinking veneer over wiggle board. I have a vacuum press but I cant quite see how a bag could confom to the multiple curves. As far as a form would I need to cut many MDF pieces and somehow stack them every 3-6" inches vertically
Appologizes if the pic doesn't adequately show where I'm headed but the construction of the curved piece has me to stumped to go much further in the design.
Dan
View attachment 9752 View attachment 9753
The supports will have top and bottom caps with dados to accept the curved vertical piece.
Second pic is just the vertical piece that has me scratching my head. The radius of the ends are 4". I want use figured veneer for these pieces. I'm thinking veneer over wiggle board. I have a vacuum press but I cant quite see how a bag could confom to the multiple curves. As far as a form would I need to cut many MDF pieces and somehow stack them every 3-6" inches vertically
Appologizes if the pic doesn't adequately show where I'm headed but the construction of the curved piece has me to stumped to go much further in the design.
Dan
View attachment 9752 View attachment 9753