Results 1 to 2 of 2

Thread: Cyclone chip barrel to lid seal question.

  1. #1
    Join Date
    Nov 2006
    Between Aledo and Fort Worth, TX

    Cyclone chip barrel to lid seal question.

    What type of rubber seal have you all used for your chip barrel to lid? Any type of material better than the rest? Is there something that works well and is easy to apply? I'll be making my lid out of 3/4" MDF, so the top should be smooth enough for something to stick to well. TIA! Jim.
    Coolmeadow Setters...
    Exclusively Irish!
    Home of Irish Setter Rescue of North Texas
    When Irish Eyes are smiling, they're usually up to something!!
    At a minimum, I'm Pentatoxic...but most likely, I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, season 3

  2. #2
    Join Date
    Oct 2006
    jim, closed cell foam tape will work well.......i use the stuff for vacuum`s 1/2" wide and 1/4" thick.....not the foam tape weather stripping the borgs sell. i get mine from qualityvak, don`t know where to get some on a t-day weekend? tod
    [SIZE="1"] associated with several importers and manufacturers.[/SIZE]

Similar Threads

  1. repairing a chip question
    By John Daugherty in forum Finishing School
    Replies: 8
    Last Post: 05-21-2016, 10:55 PM
  2. Overfilled My Cyclone Barrel
    By glenn bradley in forum General Woodworking Q&A
    Replies: 28
    Last Post: 02-08-2014, 07:29 PM
  3. Can I use a "cardboard" barrel as a chip collector?
    By Tom Baugues in forum General Woodworking Q&A
    Replies: 13
    Last Post: 03-13-2012, 08:49 PM
  4. A Barrel of Laughs this one
    By Chas Jones in forum Lathe Project Showcase
    Replies: 5
    Last Post: 06-12-2010, 12:44 AM
  5. Deft Laquer / Arm-A-Seal / Seal-A Cell.
    By Chuck Beland in forum General Woodturning Q&A
    Replies: 6
    Last Post: 09-24-2007, 01:42 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts