Robert McGowen
Member
- Messages
- 52
This is a vase I designed based on a rather large vase that I liked the form of. The vase turned out to be 16" tall, which is about the max of my Jet 1220 when you get the tail stock, face plate, etc., on the lathe that I needed to turn this. I would appreciate any concerns on shape or design, as it will help me with the next piece, but this one is finished!
16" tall, 400 pieces of hard maple and 81 pieces of cherry. Twin spirals of cherry. There are 41 rings and 40 of the rings are 12 segments each. All rings are 3/8" tall. Sanded to 800 grit and finished with 3 coats of Waterlox original.
Thanks for looking.
16" tall, 400 pieces of hard maple and 81 pieces of cherry. Twin spirals of cherry. There are 41 rings and 40 of the rings are 12 segments each. All rings are 3/8" tall. Sanded to 800 grit and finished with 3 coats of Waterlox original.
Thanks for looking.