Oh my the shop is messed up
But my Belsaw planer has the new out-feed roller & drive chains & belt installed & everything adjusted.
The in-feed roller was real bad & the Belsaw rep said to switch the out-feed roller to the in-feed side & put the new roller on the out-feed side....so I did. I am still going to get a new roller for the in-feed side I don't like the looks of it. It is somewhere between 1/16" & 3/32" smaller in diameter in the middle than on the ends.
The planer used to run with skips & jerks because the in-feed roller was badly worn along with worn drive chains & belt.
I started at 3 pm & finished at 8 pm & was able to take my time & enjoy it.
The planer seems to work ok too.
Dad used to use this 5 hp planer for production. It also has a rip attachment. The planer isn't damaged just well used & hasn't been used much in several years.
You'll need to click on the attachments to see the pictures.
"Forget the flat stuff slap something on the spinny thing and lets go, we're burning daylight" Bart Leetch
"If it ain't round you may be a knuckle dragger""Turners drag their nuckles too, they just do it at a higher RPM"Bart