Yann Arbour
Member
- Messages
- 113
- Location
- Field, Ontario, Canada
I was sanding a piece of MDF for a project I'm working on and I wanted to use the bigger drums on my oscillating sander to get more material off quicker. As I started sanding I noticed that the sanding pads moved up the drum and wouldn't stay on and I didn't have any washer big enough so I had to improvise...
So here it is; my biscuit washer!!
While drilling through the biscuit it broke in half, the original washer held the two pieces on the drum.
So here it is; my biscuit washer!!
While drilling through the biscuit it broke in half, the original washer held the two pieces on the drum.