Greg Cook
Member
- Messages
- 2,882
- Location
- Tokiwadai, Japan
I've been looking for a spindle sander for a while and finally found one on craigslist. I stopped by today and took a look. It has 5 Spindles, 5.75L X .25" .50" 1.50" 2.0" and the optional 3.0" spindle. 5 table inserts, 3 round and 2 oblong. 1/2 HP, 110V, the table tilts 0-45. The owner added a 4" dust port.
Also included were pack of 6 each...100 grit 1/4" ($12), 100 grit 1/2" ($13) and 150 grit 3" ($20+) sanding sleeves. The optional 3" sanding spindle and table insert are about $80 Retail.
The sander looks like it was well taken care of, is fairly quiet, smooth and sands well. At $245, it might not have been a real steal, but with the optional 3" setup, I'm pretty happy with it.
Also included were pack of 6 each...100 grit 1/4" ($12), 100 grit 1/2" ($13) and 150 grit 3" ($20+) sanding sleeves. The optional 3" sanding spindle and table insert are about $80 Retail.
The sander looks like it was well taken care of, is fairly quiet, smooth and sands well. At $245, it might not have been a real steal, but with the optional 3" setup, I'm pretty happy with it.