Maple Popcorn Bowl

Messages
687
Location
Harvey, Michigan
Small maple bowl 7 5/8” diameter x 3 ¾” high by 5/16” thick. Sanded to 400 grit, 3 coats of Minwax Wipe-On Gloss Poly.

Maple Popcorn V1.JPG Maple Popcorn V2.JPG Maple Popcorn V3.JPG

As always, any comments, critiques or suggestions are appreciated!

Thanks for looking! :wave:
 
Clark - wipe on is very simple. I use a piece of paper towel folded up into a small square and use it as a pad to apply the finish with. I put on very thin coats and usually stop at 3 to 5 coats depending on the wood and how well it takes the poly. Any small bumps are taken care with a super fine sanding sponge - just lightly going over the surface.
 
Popcorn? Not big enough for popcorn at least not at my house.

This is what would happen to me if I said, "Here's your popcorn...." :rofl:

But with that being said, WOW that is nice!
 
Another winner, Steve. :thumb: Pretty wood, and nice finish. I think you're getting the hang of this lathe stuff. :p
 
Top