Ken Cook
Member
- Messages
- 3,798
I got it, and I'll make sure Tom gets it, and we'll look into your "sent items" glitch.....
Thank you, I sure hope the problem isn't due to the fact my due's fee check bounced
Thank you, I sure hope the problem isn't due to the fact my due's fee check bounced
larry merlau
Member
- Messages
- 18,740
- Location
- Delton, Michigan
Thank you, I sure hope the problem isn't due to the fact my due's fee check bounced
nope that aint it they dont let us off that easy yu lived in michigan long enough to know that we get charged for everything and dont get discounted rates either.. try checking your settings ken on your pm's maybe you dont have it set up to show that yu sent anything
Ken Cook
Member
- Messages
- 3,798
LOL, How right you are Larry...and thanks for the tip, I didn't know there were options available...I'll go check now
EDIT...found the correct setting{I hope} Thanks for the help!!!
Double edit---Success! Thanks again Larry, those little 'tick' boxes get me every time!
EDIT...found the correct setting{I hope} Thanks for the help!!!
Double edit---Success! Thanks again Larry, those little 'tick' boxes get me every time!
Last edited:
Wayne Eikenberry
Member
- Messages
- 226
- Location
- Emporia, KS
Pictures from the last swap are a little intimidating, but I'll give it a shot. If I am reading the signals from my wife correctly, I think I actually have to make two boxes!
PM is on the way.
Ike
PM is on the way.
Ike
- Messages
- 37,709
- Location
- ABQ NM
Thank you, I sure hope the problem isn't due to the fact my due's fee check bounced
Been meaning to talk to you about that.
Apparently our bank (Third National Bank of West Rancho Cucamonga) is having trouble reading the magnetic bank info printed on your check. They say they've never heard of Yooper State Bank and Bait Shop before. Any chance you could just tape the 37 cents onto a 3 x 5 card and send it in that way?Glad to see you got the PM issue fixed, and also glad to see you're jumping into the box swap.
Cynthia White
Member
- Messages
- 3,220
Is it okay if the box is "some assembly required" if the instructions are good?
- Messages
- 6,354
- Location
- Plainwell, Michigan
Is it okay if the box is "some assembly required" if the instructions are good?
Nope just grab some 16D nails and hammer that puppy together
Chuck Thoits
Member
- Messages
- 4,045
- Location
- NH
Ok PM sent
But I'm not gonna cheap out like Brent and use OSB. I'm going all out and use AdvnThech.
But I'm not gonna cheap out like Brent and use OSB. I'm going all out and use AdvnThech.
Steve Southwood
Member
- Messages
- 5,100
- Location
- Santa Claus, In
Chuck step up to the challenge and go MDF.
Chuck Thoits
Member
- Messages
- 4,045
- Location
- NH
- Messages
- 6,354
- Location
- Plainwell, Michigan
cause I don't have it
- Messages
- 37,709
- Location
- ABQ NM
No I'm going for water proof.
I dip my OSB projects in paraffin wax. Nice semi-gloss sheen and watertight as a frog's hind end.
- Messages
- 6,354
- Location
- Plainwell, Michigan
You guys are a HOOT I did pick and dimension my wood today and it's purdy
I did pick and dimension my wood today and it's purdy
Cynthia White
Member
- Messages
- 3,220
You guys are a HOOT
oh yeah, me too. I picked and dimensioned a blackberry bush.....my box is coming with bandaids.....
KaLea Thoits
Member
- Messages
- 593
PM sent (even hit the send key)
Ken Cook
Member
- Messages
- 3,798
Been meaning to talk to you about that.
Glad to see you got the PM issue fixed, and also glad to see you're jumping into the box swap.
Those darn magnetic strips.... that's the same thing the gubament said when I applied for the tarp bailout.
glenn bradley
Member
- Messages
- 12,579
- Location
- SoCal
Hey Tom, Could ya post who's sent you an address so's none of us thinks we're in and gets missed? Thanks.
- Messages
- 6,354
- Location
- Plainwell, Michigan
Will do tomorrow Glenn and all I am a rookie at running a swap and have lots to learn But of all that said they were in originally, all but one person have sent in addresses
I am a rookie at running a swap and have lots to learn But of all that said they were in originally, all but one person have sent in addresses
Chuck Thoits
Member
- Messages
- 4,045
- Location
- NH
On second thought I'm out. Pull my name off the swap list.
larry merlau
Member
- Messages
- 18,740
- Location
- Delton, Michigan
On second thought I'm out. Pull my name off the swap list.
nope yu already sent it in there are no returns in this chuck yur in it!!!!!