Search results

From my blog: Christopher Schwarz made a terrific presentation at the Berea Hand Tool Conference in November: Forgotten Workbenches and Workholding. During his presentation Chris covered workholding. As a result of this presentation, I started doing some serious thinking about my European...

From my blog: A short note: WIA - Woodworking in America, in case you are not familiar with this new acronym. Over the years, Christopher Schwarz has built many benches - from the Roman style door-and-saw horse, to much-improved models based on old references. And he has published a book that...

From my blog: A link to a very short video For your viewing pleasure: A very short video. I extracted some of Christopher Schwarz's best moves during his session on Forgotten Workbenches and Workholding - Woodworking in America, in Berea. And it ain't no tango! Enjoy! Al View videos from...

I want to share with you my latest: I have created a short video, An Intro to the Leigh FMT , the famous Frame Mortise & Tenon jig. You can view the video and download it at my blog. And, while you are there, enjoy the new look-and-feel! .

I want to share the following with you, because it happened to me. I heat the shop during Winter, using a forced air system. This creates a very dry heat that could result in bench tops not being as flat as we might need them. The following photos illustrate the current status of my workbench...

I invite you to visit my blog to view the video I made while at the 2008 Kansas City Woodworking Show. This is a rare opportunity we have to meet some members of WoodNet amd SMC in video format. A bunch of WoodNet and SMC members attended a breakfast ahead of the Show's opening time. You get a...

I love the design stage of a project, whether it is done on a napkin, in a design book, computer program, anything to get it done. As a result, I am interested in your feedback on this bread box I designed and built. A little teaser - this is the box, on our harvest table and before delivery...

I posted on my blog the last episode this morning. I hope you know where to find it :thumb:. Thanks for looking! .

Some of you will remember the boxes that I submitted to a Silent Auction at our daughter's church. They did very well at the auction, as the bids were nice and generous. The following is a photo of the two, just before I applied Waterlox as the finish: A few people have been interested in a...

I have been making this little box for a silent auction at a local church in which our daughter is a member. I have never entered anything in a silent auction; I still have to finish sanding, apply Waterlox original, hand-rubbed to a satin finish: You can view the rest of the story at my...

My wife Sandy will be demonstrating at our next Guild meeting how to make something like this - and it is NOT just a lump of wood :D :D : A second image gives the answer, but you must find it... Thanks for looking! ------- Al

I need to spray the finish coat on the adjustable shelf, and I will finish this cabinet. Here is the concept sketch, done in eCabinet Systems software and rendered as a *.jpg: It will become a new tool sharpening station for lathe chisels and gouges, regular chisels, and hand plane blades...

It has been quite a while since I posted any recent photos of our shop. I have been busy making saw dust, so it was a good time to shoot some pix, before picking up all the clutter. This will be a short one, as I must get busy and update the blog with some stuff ( http://blog.sandal-woods.com/...

Hi, folks! Yesterday I updated the blog, and want to share the latest with you: http://blog.sandal-woods.com/ . I hope this can stay in the General section, as many people don't usually check the finishing area. The update shows some details of construction of the spray booth we have in the...

The blog can be found at http://blog.sandal-woods.com/ . I don't want to compete with Marc (The Wood Whisperer), that's for sure! But I do want to share "stuff" on a more regular basis than I did with my web site. Please, feel free to leave comments and suggestions about content. Thanks...

Thanks for looking! Photos of the finished cart to come soon. This design might be of use to others. I used eCabinet Systems software to do the design. Dimensions: 1. 38 inches wide 2. 34-1/2 inches tall, plus 4 inches for the casters 3. 20 inches deep Materials, construction, and...

My thanks to all who commented and provided guidance in the design of this entertainment center. I have made several changes, and have incorporated many of the suggestions. Although this rendering shows a flat screen unit, the TV set will most likely be a standard set - it is yet to be...

Comments and suggestions are welcome. Thanks for looking! This is an entertainment center I am currently designing; it is still a work-in-progress (a WIP). Still playing around with the following: 1. Crown molding. As you can see, I have used three different styles, to see which one works...

To understand what I was doing while learning eCabinet Systems (eCabinets for short), I created two cabinets, placed them side-by-side, and then rendered the concept "drawing" into a photo-realistic image; finally, I saved the image as a jpg file: The cabinet on the left has 3 lights "in"...

Thanks for looking! LOML needed a 48-inch cabinet and lots of drawer space. So, I designed something quickly to fulfill the need :D . Two banks of three drawers, 48 inches wide, 36-1/2 inches tall, 24 inches deep. 1. The design concept (done in eCabinet Systems software as a learning...