Cabinet Shop Auction in Elkhart

Rennie Heuer

Moderator
Staff member
Messages
11,607
Location
Constantine, MI
Just about everything is too big for me. Posting here in case others are interested. LINK



Dust Technologies model DT-250 25hp vertical 5 bag filtering dust collection system onadjustable rack 30/460 volt s/n 23081514

Like new manufactured 2017 C.R. Onsrudmodel 145M12D s/n 145G170504 460-volt3 phase M-Series CNC router in nearly likenew condition

(2) Weg 3 hp 3 phase vacuum pumps, newin 2017

Thermwood model C53 s/n MTC002812 3phase 220 DAC voltage single head router

Elektrim 1500 hp vacuum pump

Federal Pacific model 36B 15KBA transformer

Leadermac Smartmac 518 model LMC 518Ss/n 073007 2007 /08 yr. 5 head molder

Danther 2M bag filter system 2007 model yr.model NFP-5750 3 phase 7-1/2 hp baggeddust collection filter system

Rockwell Delta floor model commercial12-14” tilting arbor floor model table sawsand 10” floor model commercial table saws

Grizzly model G1095 single hp single phasepower feeder

Various Grizzly 3 hp dual bag and single bagdust collectors

Northtech model NT-24-lOHCVS 10 hp 3phase 24” planer mfg’d in 2007

Ritter model K200 12’ framing table dualpneumatic clamp gantry

Giben beam style panel saw

Grutter model 1600 upcut power chop sawwith manual tail stock stops

Castle model TSM-21 pocket drill

(2) 3 phase double N tenoning machines

Voorwood model Al78 shaper/sander

Progress Machine Co. model PMC150approx. 36” face sander

Approx. 4’ x 7’ wide adjustable clamp framingtable double side w/pneumatic air clamps

Ritter model R-10 1-1/4” 5-3 s/n 1059 3 phase230-volt shaper 3 phase power feeder

Nice newer, DeWalt model DWS779 compound miter slide chop saw

Atlas Copco model GA5 7.5 hp rotary screwair compressor new in 2000 with small volume tank, shows 44K hours

Older Hyster 40 approx. 4000 lb. solid cushion tires with 2 stage mast LP forklift

Good Timesaver model 1321-14-01 s/n31048 3 phase 230-volt dual drum sanderseries 1300 2” wide with additional belts

Thompson Industries 1-1/2 hp single phase115-volt hinge boring machine mfg’d newin 2012

Uline poly strapping machine model H-959semi-automatic

Delta approx. 10” double emery benchgrinder

Approx. 28’ x 20’ square approx. 10’ tallbatch style paint booth by Devilbiss withapprox. 9’ x 9’ door fire suppression systemand slider door

Good Kremlin Rexson 15;1 paint gun sprayer

Up to half dozen high pressure paint gunsmany Kremlin Rexson and others

(2) Good Kremlin 20-25 paint pump

Various 5-10 high pressure paint pots

Varied amount of rolling fixed finger finishdrying racks

New bundles of cabinet grade raw GenesisProducts plywood and panel board, 4 x 8in Elegant Maple and Birch-Elegant Maple

Delta bench model 12” drill press

Large amount of cabinet hardware, cabinet drawer slides, fasteners, various smallpneumatic staplers by Bostitch and others, other varied pneumatic air hand tools,sanders, screw guns, drills

(2) floor model commercial fans, approx. 42”

Approx. 9’ wide x 9’ tall adjustable palletracking

Unique model 250 3 phase 440 volt 7.5 hpdoor machine

Brandt Optimat KDN350C 2003 model years/n 0-281-02-9038 edge banding machinefor parts only

Rapid Air s/n 979110 3 phase 460 volt 7.425million BTU natural gas air make-up system

Varied amount of raw wood material andmolding, corner bead, trim, crown

Large amount of new cabinet and vanitybases
 
What? You can't use a 3 phase 220 DAC voltage single head router?

Looks like that shop had some serious tooling.
 
my cousin and uncle had a kitchen cabinet showroom and large shop on long island since the 60s
my cousin closed it a few years back, real estate taxes and other taxes were outrageous.

alot of his equipment didnt sell, seems not many cabinet shops around anymore and most of the commercial machines are too large for home shops.

He said he had to scrap several of the machines.

Ive been to some cabinet shop and woodworking firm auctions. I was always a bit skeptical about buying machinery or even smaller things like routers knowing those things had 100os upon 1000s of hours of use.
 
Top