CNC Dust Boot

Brent Dowell

Administrator
Staff member
Messages
15,100
Location
Reno NV
So, Not the best print I've ever made and will probably reprint it, but here's a dust boot I made for my Ox CNC.

I used to have one that was attached to the Z axis and would move up and down. That's not so great when you need to move the z past the level of the dust boot.

So this one is attached to the gantry and the spindle moves up and down through it. Set the height at the beginning of the job and you're golden.

dust boot.jpg
 
Top