Dave Hoskins
Member
- Messages
- 5,252
- Location
- Parker County, Texas
Did the finishing touches on this today before the heat came on. The diameter is 3 1/2" and total height of 4". The vessel height is 3 1/2" and depth is 3". The volume is 1 1/4 cup. Sealed the wood with walnut oil. Wasn't sure about whether a couple of spots on the outside were tool marks or what. While spinning at high speed I rubbed in several coats of a wax that has a fairly fine grit in it. Then wiped everything back down. All was fine so I guess I left a couple of marks in it. The finishing was done with 3 coats of shellac.