working on other signs

Dan Noren

Moderator
Staff member
Messages
6,762
Location
falcon heights, minnesota
got the blanks cut up, and ready for some testing. not sure why, but having some problems with the laser on this one. got the feeds, and speeds just right, but something on the x axis is giving a shudder. so, i think i am going to switch as much as i can to the cnc. tests on the beer prayer signs, and one, that i gave the first one to pop. he thought it was quite funny. i also put a quick splash of paint on the last test, and it worked out ok
.IMG_20200426_192430096_HDR.jpgIMG_20200426_171215345.jpgIMG_20200426_184637680.jpgIMG_20200426_193158787_MP.jpgIMG_20200426_204600411.jpgIMG_20200426_204500573.jpg
 

Dan Noren

Moderator
Staff member
Messages
6,762
Location
falcon heights, minnesota
the one that got messed up, turned out to be three, and then due to misplacement of my x and y, i added 3 more to the pile. today, i made very sure that the x and y starting points were in the right area, and got the last 3 done, and trimmed to size. i'm thinking about taking them in to work with me, to finish them off. lots of free time now.
 
Top