James Aguanno
Member
- Messages
- 39
- Location
- New Jersey (Philadelphia area)
As I mentioned in my garage remodel thread, I am planning to build a dedicated detached shop in my back yard and would like to track it here (hopefully I can get a bunch of good ideas as I already have from the various threads here). I mentioned that the process would be starting in the spring, but that has changed for the better. Since we just finished a large construction project, my wife has convinced me to hire someone for this one. I am not completely pleased with this decision, but I will live with it in order to have a new space to work in. That said, we are on a tight budget.
Our goal was to build something between 200 and 300 square feet. Our back yard (property is only 75’ X 135’ with a slope in the back) and life style (small kids still using the back yard for play) is the main factor in this decision. We looked at a lot of sizes and finally decided on a 12’ X 20’ (I know… too small, but I can not go bigger) building and decided to go with a shed builder. This was a difficult decision for me, but again, the budget took over. The shed will be build on a 4’ X 4’ “skid” system, but I will be digging and pouring piers to anchor the shed (township requirement as well). I applied for the permits on Friday and hope to hear by this Friday. I am hoping to have the building installed by the end of the month.
There are some things about the shed company that I am not happy with, but think I can live with. For instance, the framing is all on two foot centers (2 X 4 walls and 2 X 6 roof) except the floor will be 2X6 on 12” centers. If this becomes an issue, I can add studs and rafters to supplement, but I should be good. The standard building comes with seven foot side walls. This was not even close to acceptable for me so I upgraded to eight foot (I would have liked higher, but the township would have required a variance). The standard building also only comes with regular wood framing and floor material (I upgraded to Pressure Treated).
The company will just be building the basic building, then I will customize (more on that later). It will come primed, and will have a cheesy double wood door. I will likely live with this for a while (will paint in the spring), but eventually will side to match the house and replace the door. I will be installing windows right away though.
Once I get through the township on the building, I will be installing the electrical system. It will likely be just a 60 Amp sub-panel. I will do all of this work myself, and have a rough idea as to the details (again, more on that later).
Attached are my initial thoughts on the floor plan (comments welcome) and I will be doing a Sketch Up drawing soon. The lathe shown is different from mine. I have a Nova 3K with a custom stand but you get the idea. I do not have a band saw yet, but plan to in the near future. The grinder is on a custom cabinet and is on wheels. The table saw is not the one shown, and the out feed table does not exist yet. The out feed will likely be a bench of sorts, and the table saw and the bench will be on wheels. The counters shown will be custom made to the space and I will be building cabinets for above the counters.
I will be building a “loft” storage area on the wall opposite the counter top. I am short, so this will probably be about 6 feet off the floor (our house is very storage challenged and this was the only request from my wife other than aesthetics) to enhance the storage space. Right now, I am thinking it will be 12’ wide by about 6’ (or so) deep.
Again, here is the layout… Comments? Ideas?
Our goal was to build something between 200 and 300 square feet. Our back yard (property is only 75’ X 135’ with a slope in the back) and life style (small kids still using the back yard for play) is the main factor in this decision. We looked at a lot of sizes and finally decided on a 12’ X 20’ (I know… too small, but I can not go bigger) building and decided to go with a shed builder. This was a difficult decision for me, but again, the budget took over. The shed will be build on a 4’ X 4’ “skid” system, but I will be digging and pouring piers to anchor the shed (township requirement as well). I applied for the permits on Friday and hope to hear by this Friday. I am hoping to have the building installed by the end of the month.
There are some things about the shed company that I am not happy with, but think I can live with. For instance, the framing is all on two foot centers (2 X 4 walls and 2 X 6 roof) except the floor will be 2X6 on 12” centers. If this becomes an issue, I can add studs and rafters to supplement, but I should be good. The standard building comes with seven foot side walls. This was not even close to acceptable for me so I upgraded to eight foot (I would have liked higher, but the township would have required a variance). The standard building also only comes with regular wood framing and floor material (I upgraded to Pressure Treated).
The company will just be building the basic building, then I will customize (more on that later). It will come primed, and will have a cheesy double wood door. I will likely live with this for a while (will paint in the spring), but eventually will side to match the house and replace the door. I will be installing windows right away though.
Once I get through the township on the building, I will be installing the electrical system. It will likely be just a 60 Amp sub-panel. I will do all of this work myself, and have a rough idea as to the details (again, more on that later).
Attached are my initial thoughts on the floor plan (comments welcome) and I will be doing a Sketch Up drawing soon. The lathe shown is different from mine. I have a Nova 3K with a custom stand but you get the idea. I do not have a band saw yet, but plan to in the near future. The grinder is on a custom cabinet and is on wheels. The table saw is not the one shown, and the out feed table does not exist yet. The out feed will likely be a bench of sorts, and the table saw and the bench will be on wheels. The counters shown will be custom made to the space and I will be building cabinets for above the counters.
I will be building a “loft” storage area on the wall opposite the counter top. I am short, so this will probably be about 6 feet off the floor (our house is very storage challenged and this was the only request from my wife other than aesthetics) to enhance the storage space. Right now, I am thinking it will be 12’ wide by about 6’ (or so) deep.
Again, here is the layout… Comments? Ideas?