Alan Bienlein
Member
- Messages
- 2,045
This is what I threw together when loml's sister came to stay with us for the summer last year. I had less then a week to build and install it so I decided to make it totaly out of birch plywood.
Here is a picture of one of the frames with the drawer frontsplaced in the opening. I made the frames using pocket screws and the fronts I cut mortise and tenons on the tablesaw. I trimmed the ply edges of the frames with a bead detail and I used part of an ogee bit to make some trim pieces to cover the plywood edges at the beaded panel. All the drawers are 1/2" ply with dovetails.
Here they are being installed.
The center is a window seat with storage.
Here is a picture of one of the frames with the drawer frontsplaced in the opening. I made the frames using pocket screws and the fronts I cut mortise and tenons on the tablesaw. I trimmed the ply edges of the frames with a bead detail and I used part of an ogee bit to make some trim pieces to cover the plywood edges at the beaded panel. All the drawers are 1/2" ply with dovetails.
Here they are being installed.
The center is a window seat with storage.