allen levine
Member
- Messages
- 12,369
- Location
- new york city burbs
Wasnt sure if this is worth posting about or not.
Alot of plywood guts, after clamping the box, and measuring up square, measuring all the sides diagonally, to see if I got square, after putting some slices of maple in a joint or two, just to tweak it ever so slightly, I guess clamping pressure decided the final outcome.
The diagonal sides top to bottom are off 1/8, so I figure 1/64 here, 1/64 there, nearly impossible for me to see on my tape measure, all adds up if it goes in one way, a reason I dont like to build big cabinets.
I made a solid wood base, since I dont trust the weight of this unit when filled to depend on the four legs, besides my main concern is sagging in the middle.
I have to run out and disconnect the base, its all wrong, sorry, will be back later.
Alot of plywood guts, after clamping the box, and measuring up square, measuring all the sides diagonally, to see if I got square, after putting some slices of maple in a joint or two, just to tweak it ever so slightly, I guess clamping pressure decided the final outcome.
The diagonal sides top to bottom are off 1/8, so I figure 1/64 here, 1/64 there, nearly impossible for me to see on my tape measure, all adds up if it goes in one way, a reason I dont like to build big cabinets.
I made a solid wood base, since I dont trust the weight of this unit when filled to depend on the four legs, besides my main concern is sagging in the middle.
I have to run out and disconnect the base, its all wrong, sorry, will be back later.
Last edited: