Chuck Thoits
Member
- Messages
- 4,045
- Location
- NH
Ok from the top we bid a kitchen at the start it was to be built from scratch. Ya know a nice custom job. Well in the design proses the owner finds a "custom kitchen" company and well that ended the build. So this past week we did the install. Here is the proof.
Pic one the hardware
pic 2 the basic box don't worry no fasteners where harmed in the gluing of this box
pic 3 the back corner of the box
pic 4 the front corner
pic 5 the second cabinet yes that is a gap in the floor they couldn't be bothered to say like datto the bottoms in or any thing.
Oh and this box was a good 1/4" out of square when we got it but ta least the glue they use to hold it to gather is weak a copula of good smacks with the hammer and it fell apart so we could fix it.
Pic 6 they are big on up selling the dove tail boxes
pic 7 1 and 2 installed.
Pic 8 the rest of the boxes
pic 9 the rest of the kitchen installed. Notice the bow in the sink base. I guess we count on the counter top to support that.
This batch of cabinets has under cab lights been that way from the start. So how do we go about that well in this shop they send you a bottom rail to be feild installed to cover the lights. I guess when you have made to order cabinets you can expect them to be ready for the lights that they sold you.
pic 10 the oven cabinet
Now take a look at pic 9 right side cabinets they have finished panel ends. This fine custom shop has decided that finished ends will be a panel applied to the box so you have this nice line next to your door on your frame less full over lay doors.
In the last pic you can see the nice flat plywood frig cab. One would have thought that it would be a panel on the exposed part but well that's not how we do it is the answer we got and to apply one here would look funny with the extra line.
Pic one the hardware
pic 2 the basic box don't worry no fasteners where harmed in the gluing of this box
pic 3 the back corner of the box
pic 4 the front corner
pic 5 the second cabinet yes that is a gap in the floor they couldn't be bothered to say like datto the bottoms in or any thing.
Oh and this box was a good 1/4" out of square when we got it but ta least the glue they use to hold it to gather is weak a copula of good smacks with the hammer and it fell apart so we could fix it.
Pic 6 they are big on up selling the dove tail boxes
pic 7 1 and 2 installed.
Pic 8 the rest of the boxes
pic 9 the rest of the kitchen installed. Notice the bow in the sink base. I guess we count on the counter top to support that.
This batch of cabinets has under cab lights been that way from the start. So how do we go about that well in this shop they send you a bottom rail to be feild installed to cover the lights. I guess when you have made to order cabinets you can expect them to be ready for the lights that they sold you.
pic 10 the oven cabinet
Now take a look at pic 9 right side cabinets they have finished panel ends. This fine custom shop has decided that finished ends will be a panel applied to the box so you have this nice line next to your door on your frame less full over lay doors.
In the last pic you can see the nice flat plywood frig cab. One would have thought that it would be a panel on the exposed part but well that's not how we do it is the answer we got and to apply one here would look funny with the extra line.
Attachments
-
tn_mass 001.JPG57 KB · Views: 116
-
tn_mass 002.JPG42.2 KB · Views: 117
-
tn_mass 003.JPG39.1 KB · Views: 115
-
tn_mass 004.JPG47 KB · Views: 113
-
tn_mass 005.JPG50.9 KB · Views: 115
-
tn_mass 006.JPG43.1 KB · Views: 112
-
tn_mass 007.JPG49 KB · Views: 107
-
tn_mass 008.JPG52.5 KB · Views: 106
-
tn_mass 009.JPG56.1 KB · Views: 129
-
tn_mass 010.JPG44.4 KB · Views: 121
Last edited: