Dave Richards
Member
- Messages
- 2,930
- Location
- SE Minnesota
Would any of our SketchUp users be up for a challenge? This should be a simple one for you.
Two 48 in tall, 4 in. square posts with a 2x2 placed diagonally between them such that the pointy ends of the miters are exactly at the top and bottom of the posts. Nothing to it, right?
The diagonal must measure exactly 2 inches square in cross section.
Two 48 in tall, 4 in. square posts with a 2x2 placed diagonally between them such that the pointy ends of the miters are exactly at the top and bottom of the posts. Nothing to it, right?
The diagonal must measure exactly 2 inches square in cross section.