tosonera mk 4 project

Dan Noren

Moderator
Staff member
Messages
7,984
Location
falcon heights, minnesota
well, the two hole tosotnera was such a hit, someone now wants one with 4 holes. i found that i had some white oak scraps that will work just fine. got them planed today, and will do the glue up tomorrow. i may have enough to make 2 of them.
 

Attachments

  • 001 oak for the new tostonera.jpg
    001 oak for the new tostonera.jpg
    90.3 KB · Views: 17
  • 002 boards planed.jpg
    002 boards planed.jpg
    85.2 KB · Views: 15
went to town on this one today. edge jointed, and cut the parts to size. i like the idea of having the front of the lid overhang just a touch. then i glued up the blank for the bottom, and went on to making a new platform for the brains of the cnc machine (see new thread). once that was done, cleaned up the base, and marked the positions for the holes. i set up and ran the programs for the logo, and lettering. while that was going on, i cut the holes in the base, and rounded over the edges. once the cnc part was done, i laid out, and drilled the insets for the modified dowels. then fitted everything together. all that is left now, is just the sanding, hinges, and oil.
 

Attachments

  • 009 working on lettering.jpg
    009 working on lettering.jpg
    96.1 KB · Views: 6
  • 008 edges rounded over.jpg
    008 edges rounded over.jpg
    89.8 KB · Views: 7
  • 007 holes drilled.jpg
    007 holes drilled.jpg
    92.3 KB · Views: 6
  • 006 working on logo.jpg
    006 working on logo.jpg
    75.9 KB · Views: 6
  • 005 cnc stuff ready to go.jpg
    005 cnc stuff ready to go.jpg
    114.8 KB · Views: 6
  • 004 all parts trimmed to size.jpg
    004 all parts trimmed to size.jpg
    88.6 KB · Views: 6
the rest of the pics....
 

Attachments

  • 014 ready for sanding and finishing.jpg
    014 ready for sanding and finishing.jpg
    95.8 KB · Views: 11
  • 013 dowels fitted to lid.jpg
    013 dowels fitted to lid.jpg
    89.1 KB · Views: 12
  • 012 insets in lid cut.jpg
    012 insets in lid cut.jpg
    101 KB · Views: 11
  • 011 dowels recut.jpg
    011 dowels recut.jpg
    90.5 KB · Views: 11
  • 010 finished lettering and logo.jpg
    010 finished lettering and logo.jpg
    89.1 KB · Views: 11
sanded, and finished this one today as well.
 

Attachments

  • 014 ready for sanding and finishing.jpg
    014 ready for sanding and finishing.jpg
    95.8 KB · Views: 7
  • 015 hinges attached.jpg
    015 hinges attached.jpg
    136.3 KB · Views: 7
  • 016 sanded opened.jpg
    016 sanded opened.jpg
    125.5 KB · Views: 9
  • 017 sanded closed.jpg
    017 sanded closed.jpg
    122.7 KB · Views: 7
  • 018 oiled closed.jpg
    018 oiled closed.jpg
    74 KB · Views: 8
  • 019 oiled open.jpg
    019 oiled open.jpg
    144.5 KB · Views: 7
Top