Carol Reed
In Memoriam
- Messages
- 5,533
- Location
- Coolidge, AZ
The tiny shop walls are nearly done and it is time to plan and construct the doors. There are two openings, each ~4 feet wide. The intent was to make double doors. I'd love to get used doors and make them fit from Habitat but they didn't have anything suitable. The restraint is they must match the walls so they will be clad with the same T-111 as the walls.
But the door itself. I don't have my planer available so I am thinking laminating MDF, trimmed with solid wood, then clad with the T-111. That gives me solid wood for hinges and latches and the flatness of the MDF. Lots of work and I am open to other suggestions.
But the door itself. I don't have my planer available so I am thinking laminating MDF, trimmed with solid wood, then clad with the T-111. That gives me solid wood for hinges and latches and the flatness of the MDF. Lots of work and I am open to other suggestions.