Brad Hungler
In Memoriam
- Messages
- 117
- Location
- Independence Ky
Hello Everyone; I have heard people talking about what size wire to use when replacing cords on equipment. I highly recommend using the proper wire size. Typically what I look for is BREAKER size, Usually 20 amp for 3 prong standard outlet. While your equipment label may say it draws (example) 8 amps, your breaker is still capable of delivering 20 amps through the cord. (or whatever the size of breaker) Using improper wire size can result in overheating,or dare I say fire!!! With all the excellerants we all have the last thing we need are sparks. #10ga. is 30amp. max #12ga is 20amp. max #14ga. is 15amp. max Always use ground wire! Wire will read on exterior 10/3 12/3 14/3 Hope this helps someone, Thanks, Brad
Last edited: