allen levine
Member
- Messages
- 12,371
- Location
- new york city burbs
so is anyone from this board attending the show this year?
Im tempted, only because there is a 3 hour class on scroll sawing, and Id love to learn some technique and could use all the help I could get. Seems like a nice hobby to get into as I get up there in the years, no heavy lifting, and if I get any good at it, makes some beautiful projects.
Id like to meet up for dinner, lunch, hangout, whatever, so please pm me and let me know.
I will be up there with my wife again, as she has cleared her schedule
If I do come,(90% sure Ill be there as of today), my wife would love to have company during the day, Id be most likely dropping her off at Saratoga raceway for a few hours so she can play penny slots.(ya hear that sayer)
Wed be arriving Saturday mid afternoon and staying through sunday night.
I think I got the schedule of demonstrators posted correctly, hope Im allowed to do this.
these are free demos I believe, you just have to register for them.(I never paid in the past)
if someone could repost it in chart form, would be easier to understand, I cant figure it out.
Im sure Ill see Don Orr up there.
rev. 1/25/14
Saturday Travers Alabama Whitney Highrock
10:30 - 12 Noon Barb Nottke Rob Porcaro Warren Stoker Jerry Sambrook
Cutting Puzzles with Scroll Saws Drawer Making - Steps to Success Toy Making Turning a natural edge end grain platter
12:30 - 2:00 PM Janette Square Geoffrey Noden Stan Munro Bob Van Dyke
Intarsia Woodworking Basics – Tips and Tricks Noden Inlay Razor Tooth Pick Architecture Dovetails - More than 10 ways
2:00 - 3:30 PM Charlie Rougle Rob Porcaro Dave Powell Jerry Sambrook
Make a bowl without a Lathe on a Scroll Saw Hand Planes - Choices, Set Up, Use Sharpening Turning Small Hollowforms
3:30 -5:00 PM Janette Square Bill Sterling Glenn Flagler Bob Van Dyke
Intarsia Woodworking - Shaping Techniques Guitar Making Fishing Poles The Basics of Using Veneers to Create Outrageous Patterns
rev. 1/25/14
Sunday Travers Alabama Whitney Highrock
10:30 - 12 Noon Charlie Rougle Rob Porcaro Dave Powell Jerry Sambrook
Make a bowl without a Lathe on a Scroll Saw Hand Planes - Choices, Set Up, Use Sharpening Turning Small Hollowforms
12:30 - 2:00 PM Janette Square Bill Sterling Glenn Flagler Bob Van Dyke
Intarsia Woodworking - Shaping Techniques Guitar Making Fishing Poles The Basics of Using Veneers to Create Outrageous Patterns
2:00 - 3:30 PM Barb Nottke Rob Porcaro Warren Stoker Jerry Sambrook
Cutting Puzzles with Scroll Saws Drawer Making - Steps to Success Toy Making Turning a natural edge end grain platter
3:30 -5:00 PM Janette Square Geoffrey Noden Stan Munro Bob Van Dyke
Intarsia Woodworking Basics – Tips and Tricks Noden Inlay Razor Tooth Pick Architecture Dovetails - More than 10 ways
garrett hack will be teaching a 3 hour class as well.(65 dollar fee)
Im tempted, only because there is a 3 hour class on scroll sawing, and Id love to learn some technique and could use all the help I could get. Seems like a nice hobby to get into as I get up there in the years, no heavy lifting, and if I get any good at it, makes some beautiful projects.
Id like to meet up for dinner, lunch, hangout, whatever, so please pm me and let me know.
I will be up there with my wife again, as she has cleared her schedule
If I do come,(90% sure Ill be there as of today), my wife would love to have company during the day, Id be most likely dropping her off at Saratoga raceway for a few hours so she can play penny slots.(ya hear that sayer)
Wed be arriving Saturday mid afternoon and staying through sunday night.
I think I got the schedule of demonstrators posted correctly, hope Im allowed to do this.
these are free demos I believe, you just have to register for them.(I never paid in the past)
if someone could repost it in chart form, would be easier to understand, I cant figure it out.
Im sure Ill see Don Orr up there.
rev. 1/25/14
Saturday Travers Alabama Whitney Highrock
10:30 - 12 Noon Barb Nottke Rob Porcaro Warren Stoker Jerry Sambrook
Cutting Puzzles with Scroll Saws Drawer Making - Steps to Success Toy Making Turning a natural edge end grain platter
12:30 - 2:00 PM Janette Square Geoffrey Noden Stan Munro Bob Van Dyke
Intarsia Woodworking Basics – Tips and Tricks Noden Inlay Razor Tooth Pick Architecture Dovetails - More than 10 ways
2:00 - 3:30 PM Charlie Rougle Rob Porcaro Dave Powell Jerry Sambrook
Make a bowl without a Lathe on a Scroll Saw Hand Planes - Choices, Set Up, Use Sharpening Turning Small Hollowforms
3:30 -5:00 PM Janette Square Bill Sterling Glenn Flagler Bob Van Dyke
Intarsia Woodworking - Shaping Techniques Guitar Making Fishing Poles The Basics of Using Veneers to Create Outrageous Patterns
rev. 1/25/14
Sunday Travers Alabama Whitney Highrock
10:30 - 12 Noon Charlie Rougle Rob Porcaro Dave Powell Jerry Sambrook
Make a bowl without a Lathe on a Scroll Saw Hand Planes - Choices, Set Up, Use Sharpening Turning Small Hollowforms
12:30 - 2:00 PM Janette Square Bill Sterling Glenn Flagler Bob Van Dyke
Intarsia Woodworking - Shaping Techniques Guitar Making Fishing Poles The Basics of Using Veneers to Create Outrageous Patterns
2:00 - 3:30 PM Barb Nottke Rob Porcaro Warren Stoker Jerry Sambrook
Cutting Puzzles with Scroll Saws Drawer Making - Steps to Success Toy Making Turning a natural edge end grain platter
3:30 -5:00 PM Janette Square Geoffrey Noden Stan Munro Bob Van Dyke
Intarsia Woodworking Basics – Tips and Tricks Noden Inlay Razor Tooth Pick Architecture Dovetails - More than 10 ways
garrett hack will be teaching a 3 hour class as well.(65 dollar fee)
Last edited: