Tony Falotico
Member
- Messages
- 519
- Location
- Lake City, Florida
Anybody have the Grex 2" Angle Random Orbit Sander ?
http://www.woodcraft.com/family.aspx?familyid=20343
If so, your thoughts please .........
How big of a compressor do you have? I have a 5hp 20 gal that delivers 7.1 cfm @ 90 psi, so it sounds like I should be OK. Getting conflicting info from various retail web sites -
I would like to get the sander but not bad enough to also get a larger compressor then what I have.
Thanks in advance ..... Tony
http://www.woodcraft.com/family.aspx?familyid=20343
If so, your thoughts please .........
How big of a compressor do you have? I have a 5hp 20 gal that delivers 7.1 cfm @ 90 psi, so it sounds like I should be OK. Getting conflicting info from various retail web sites -
- The Grex website says Operating Pressure: 90 psi (6.2 bars) Air Consumption: 2.2 SCFM
- according to Woodcraft it requires a 60 gallon capacity compressor, or equivalent, to operate?
- Packard says It is powered by an air compressor that is at least 2-1/2 hp. but goes on to say Average Air Consumed - 8 cfm and states Operating Pressure - 90 psi
I would like to get the sander but not bad enough to also get a larger compressor then what I have.
Thanks in advance ..... Tony
Last edited: