- Messages
- 20,177
- Location
- Springfield, Missouri
I've been meaning to get my router bits organized for a while. I've even designated a drawer for them, but seems like they are all over my shop in different storage containers and drawers. I've also started buying several more to use on my cnc, so it was time to get started on this project.
I measured up a board to fit my drawer, which turned out to be 12" x 10". I create a different size hole for each size of bit, then copied those using the "Create linear array of copies" option. It has the option to specify the number of rows and columns of the copied object. (I'll do a tutorial on this later for the vectric users).
Next I did pocket operations all the holes and sent it to the cnc, which worked like a charm...
I measured up a board to fit my drawer, which turned out to be 12" x 10". I create a different size hole for each size of bit, then copied those using the "Create linear array of copies" option. It has the option to specify the number of rows and columns of the copied object. (I'll do a tutorial on this later for the vectric users).
Next I did pocket operations all the holes and sent it to the cnc, which worked like a charm...